✨ New Arrivals Just Dropped!Explore
Tube Roller Inserts
HomeStore

Tube Roller Inserts

Tube Roller Inserts

Select Option
From $2.91

Original: $8.30

-65%
Tube Roller Inserts—

$8.30

$2.91

The Story

These inserts are used to mount and drive the AndyMark Tube Roller.
  • Description

  • The AndyMark Tube Roller is a customizable kit that allows teams to have a long roller of a length that is specific to their need. These inserts are used to mount and drive the roller. The hex end insert has one inch of 1/2 in. hex exposed to place motion components on such as pulleys or sprockets to be driven by a motor. Both the idle and hex ends have 5/16-18 threads in them to accept a 3/8 in. diameter shoulder bolt to mount the assembly in 3/8 in. round bearings.
    • Finish: Zinc Plated
    • Hex Side Length: 1 in.
    • Hex Side Width: 0.5 in.
    • Material: Steel
    • Round Side Length: 1 in.
    • Round Side Width: 0.515 in.
Tube Roller Inserts - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Tube Roller Inserts - Image 3

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

These inserts are used to mount and drive the AndyMark Tube Roller.
  • Description

  • The AndyMark Tube Roller is a customizable kit that allows teams to have a long roller of a length that is specific to their need. These inserts are used to mount and drive the roller. The hex end insert has one inch of 1/2 in. hex exposed to place motion components on such as pulleys or sprockets to be driven by a motor. Both the idle and hex ends have 5/16-18 threads in them to accept a 3/8 in. diameter shoulder bolt to mount the assembly in 3/8 in. round bearings.
    • Finish: Zinc Plated
    • Hex Side Length: 1 in.
    • Hex Side Width: 0.5 in.
    • Material: Steel
    • Round Side Length: 1 in.
    • Round Side Width: 0.515 in.