✨ New Arrivals Just Dropped!Explore
Ships from Sydney - JST-XHP-4 to Split Connect 0.1 in. Pins Cable
HomeStore

Ships from Sydney - JST-XHP-4 to Split Connect 0.1 in. Pins Cable

Ships from Sydney - JST-XHP-4 to Split Connect 0.1 in. Pins Cable

$2.34

Original: $6.70

-65%
Ships from Sydney - JST-XHP-4 to Split Connect 0.1 in. Pins Cable—

$6.70

$2.34

The Story

This is an encoder cable used to provide power and receive encoder signals from a Hall Effect Two Channel Encoder.
  • Description
  • This is an encoder cable used to provide power and receive encoder signals from a Hall Effect Two Channel Encoder and break out each connection to a single pin perfect for a 2.54 mm pitch.

    This encoder is provided on our RS775 motor, which is on our PG Gearmotors as well as the NeveRest motor, which is on these Gearmotors:
    • NeveRest Orbital 20 Gearmotor
    • NeveRest Classic 60 Gearmotor
    • NeveRest Classic 40 Gearmotor
    • NeveRest Orbital 3.7 Gearmotor

    It has a common white connector on the end addressing the encoder and four individual female connections to fit into the input connector on a robot controller.
    • Fitting Connections: 4-pin white connector (plugs into encoder)
    • Gauge: 22 AWG
    • Length: 19.5 in.
    • Weight: 0.03 lbs.
Ships from Sydney - JST-XHP-4 to Split Connect 0.1 in. Pins Cable - Image 2

Details & Craftsmanship

Every detail has been carefully considered to bring you the perfect product.

Description

This is an encoder cable used to provide power and receive encoder signals from a Hall Effect Two Channel Encoder.
  • Description
  • This is an encoder cable used to provide power and receive encoder signals from a Hall Effect Two Channel Encoder and break out each connection to a single pin perfect for a 2.54 mm pitch.

    This encoder is provided on our RS775 motor, which is on our PG Gearmotors as well as the NeveRest motor, which is on these Gearmotors:
    • NeveRest Orbital 20 Gearmotor
    • NeveRest Classic 60 Gearmotor
    • NeveRest Classic 40 Gearmotor
    • NeveRest Orbital 3.7 Gearmotor

    It has a common white connector on the end addressing the encoder and four individual female connections to fit into the input connector on a robot controller.
    • Fitting Connections: 4-pin white connector (plugs into encoder)
    • Gauge: 22 AWG
    • Length: 19.5 in.
    • Weight: 0.03 lbs.